우리 의 제품
TUV 53650~1050000m3/H 흡입 통풍 팬 인 화력 발전소
industrial boiler waste gas desulfurization centrifugal blower fan Introduction Of desulfurization booster fan In order to reduce air pollution, industrial furnaces should strictly control the emission of SO2 and so on. Therefore, a desulfurization device is required. Due to the large resistance of the desulfurization device, it is necessary to install a desulfurization booster fan to overcome the resistance of the desulfurization device in addition to the induced draft fan
고성능 집진기 팬 희석 팬 탈황 시스템
dilution fan desulfurization system Introduction Of dilution fan Dilution fan refers to the process in which a large amount of air is pumped into the SCR(selective catalytic reduction) denitration process to dilute ammonia to a certain proportion and then sprayed into the reactor pipeline to remove nitrogen oxides from the combustion flue gas in the power plant, so as to achieve the purpose of environmental protection. The dilution fan produced by our company is widely used
시멘트 플랜트 화로 배출 블로어 팬 산업적 700000Nm3/hr 4500kW
Cement plant kiln exhaust blower fan Introduction Of exhaust blower fan The kiln head exhaust fan provides negative pressure for the kiln head dust collector and discharges the dedusted kiln head exhaust gas into the atmosphere. The working temperature of the fan is 180-250°C, and the dust content is less than 50mg/Nm³. The fan adopts a high-efficiency, low-noise, low-noise, and large-flow model. The impeller is an arc-shaped disc with single-plate backward blades, which has
소결형 식물 스테인레스 강 송풍기 더스트 블로어 팬 240000Nm3/Min 원동력 4000kW
Sintering plant dust blower Introduction Of Sintering plant dust blower In the sintering process, we can deliver the process fans which includes, Cooling air fan, Recuperation fan, Exhaust gas fan, Dedusting fan. The fans are specific designed to suitable for high temperature and high dust contents working condition, in general, we can delivery the centrifugal type blower with capacity. - Flow rate 1,400,000 Nm3/hr (330Nm3/sec); - Installed motor up to 9800kW Programme
원심력 환풍기들과의 사이에서 에너지 효율을 낳는 Ｄ 시리즈 굴리기
D Series Centrifugal Fan Introduction Of D Series Centrifugal Fan D series centrifugal fan can be widely used to transport materials, air and gas without corrosion, spontaneous combustion and viscous substances. The temperature of the conveying medium is generally not more than 80℃, and the dust and hard particles are not more than 150mg/m³. It is suitable for high pressure forced ventilation in general forging, glass, ceramics, radio, electroplating, storage battery and
Ｃ 시리즈 벨트 드리븐 원심분리기 팬 내식 1190~8050Pa 압박
C Series Belt Driven Centrifugal Fan Introduction Of C Series Belt Driven Centrifugal Fan C series belt type centrifugal fan has the characteristics of high efficiency, low noise, stable pressure curve and wide use range. It is mainly used for indoor ventilation and air exchange of cement, building materials, steel, chemical, food, shopping malls and large buildings, cooling and dust removal, etc. It can also be used with other kinds of mechanical equipment for gas circulatio
레지스탄팅 Fd 팬과 Id 팬을 보일러 결합 구동에 내세요
fd fan and id fan in boiler Introduction Of fd fan and id fan in boiler Industrial boilers are one of the most widely used areas for SIMO BLOWER products. SIMO BLOWER can provide a full set of blower products for industrial boiler users, which can meet the application performance needs of 1-450T coal-fired boiler, biomass fuel boiler, waste incineration boiler and other industrial boiler systems. SIMO BLOWER for users to buy industrial boiler fan: coal-fired boiler fan,
주도 발전소 팬 Id 보일러 블로어 팬 높은 연소 효율을 연결하기
fd fan in boiler Introduction Of fd fan in boiler Boiler blower Boiler blower generally belongs to centrifugal fan, and boiler blower can be divided into: gas boiler blower and centrifugal boiler blower, also can be called small boiler blower, and boiler induced draft fan, form a channel. Principle of boiler blower The boiler blower drives the impeller by the motor, so that the impeller produces pressure, and the energy can be transmitted. The outside of the casing is
제강 공장 흡진장치 배기팬들 산업적 직접적 동력전달계통
dust collector exhaust fan Introduction Of dust collector exhaust fan Many fans used in dust removal systems and air purification systems need to deal with very dirty air, and even high temperature and corrosion. SIMO BLOWER for dust removal system, desulfurization system, denitrification system design of dust blower, flue gas desulfurization fan, desulfurization fan, anti-wear fan and anti-corrosion fan, in addition to providing adequate performance, fan impeller, spindle,
HG785 합금강 Antifraying Id 팬 장수 냉각
HG785 Alloyed Steel Antifraying Long Life Cooling Induced Draft Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media below 150
무거운 관세 선불 고온 원심분리기 팬 벽돌 소성로
Heavy Duty Forward High Temperature Centrifugal Fan Brick Kiln Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing cooling device, which
야금학 탄소강 단일의 유입구 원심분리기 팬 고온
Carbon Steel Single Inlet Metallurgy High Temperature Centrifugal Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The parts are closely matched and have good sealing performance to ensure the output pressure will not be reduced. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m³/h) Power (kW) 9
산업적 가스 전달 고온 원심분리기 팬은 뒤로 구부러졌습니다
Industrial Gas Delivery High Temperature Centrifugal Fan Backward Curved Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The motor uses high-efficiency and energy-saving motors from China's leading motor manufacturers (and can also install branded motors required by users), with reliable quality and lower energy consumption. Technical
대용량은 아주 튼튼하 원심분리기 팬들에게 주조공장 안티프라이링을 전송합니다
Large Capacity Forward Heavy Duty Centrifugal Fans Foundry Antifraying Introduction The 7-03 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. The various designs and sizes of SIMO Blower fans are used in a diverse range of systems to deliver air, clean gas and desulphurized flue gases. The increasing requirements of the market led us to develop different types of fans for the efficient and
고온 긴 수명 과중한 업무 원심분리기 팬들 세멘르 공장
High Temperature Long Lifetime Heavy Duty Centrifugal Fans Cement Mill Introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. We provide support at every point of your ventilation system lifecycle. We offer planning and design support at the start of your project to ensure that the final system meets your precise requirements and meets
장수 뒤처지는 원심분리기 팬들 과중한 업무 에어 서플라이 마모방지
Long Life Backward Heavy Duty Centrifugal Fans Air Supply Antiwear Introduction The 7-08.35 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. Our fans operate in challenging conditions including high speed, high and changing temperatures, different load cycles, dust load, high peripheral speed, wear and much more – we meet these challenges in our fan
중간 압력 에너지 효율 원심력 환풍기들 석회 소성로
Medium Pressure Energy Efficiency Centrifugal Ventilation Fans Lime Kiln Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Applications for our wide range of industrial fans includes the steel industry, power plants, cement industry, metallurgical plants, petrochemical
HG785는 철강 많은 양 원심력 환풍기들 주조공장 고로를 합금했습니다
HG785 Alloyed Steel High Volume Centrifugal Ventilation Fans Foundry Furnace Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Standard centrifugal fans, including single inlet, with a variety of radial bladed, forward curved, backward curved and self-cleaning impellers.
