우리 의 제품
미분탄기 스테인레스 강 송풍기 효율적 에너지 절약을 운전하는 결합
Efficient Energy-Saving Coupling Driving Coal Mill Stainless Steel Blower Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. The performance of the fan is expressed by parameters
해로운 에어 방출 스테인레스 강 송풍기 많은 양 방식
Hot Sale High Volume Anticorrosion Harmful Air Emissions Stainless Steel Blower Introduction Of Centrifugal Fan The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft
송풍기 고온 폭발 가공을 취급하는 스테인레스 스틸 소재
Stainless Steel High Temperature Explosion Proofing Material Handling Blower Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data
블로어 팬 중간 압력 안티프라이링을 취급하는 뒤처지는 재료
Medium Pressure Backward Antifraying Material Handling Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan. Test assembly after production is completed to ensure that there is no
HG785는 강철 시멘트 원심분리기 팬 양흡입 환기를 합금했습니다
HG785 Alloyed Steel Double Suction Ventilation Cement Centrifugal Fan Introduction 1. It can output high out gas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. Compact shape, saving space. 3. In the use of common base, the installation is very simple and requires little support from a professional technician. 4. Made of high quality carbon steel, Stainless steel or
v 벨트 주도 Q345 뒤처지는 구부러진 시멘트 블로어 팬 마모 저항자
V-Belt Driven Q345 Backward Curved Wear Resistant Cement Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. It can be selected if the intake conditions are equivalent and the performance is suitable. It can be used to transport normal temperature
탄소강 시멘트 원심형 송풍기 팬 중간 압력 마모방지
Carbon Steel Medium Pressure Antiwear Cement Centrifugal Blower Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. The fan is equipped with temperature and vibration sensors, which can easily install the fan operation monitoring device. Made of high quality carbon steel,
스테인레스 강은 흡진장치 원심분리기 팬 고압을 통풍시킵니다
High Pressure Stainless Steel Ventilate Dust Collector Centrifugal Fan Detail introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. This series of fans is a new type of high efficiency industrial fan in the field of small flow and medium pressure. For dust-containing gas, we can meet
전진하는 생물자원 보일러 집진기 팬 편흡입 결합
Single Suction Coupling Driving Forward Biomass Boiler Dust Collector Fan Detail introduction This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the
합금 강 흡진장치 원심분리기 팬 긴 수명 방폭
Alloy Steel Long Lifetime Explosionproof Dust Collector Centrifugal Fan Detail introduction The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians. The motor shaft is elastically connected with the
집진기 팬 높은 공기 흐름 에너지 효율을 냉각시키는 화로
High Air Flow Energy Efficiency Kilns Cooling Dust Collector Fan Detail introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering
교류 전동기 산업용 보일러 1차 공기 배가스 흡입 팬 고온
AC Motor High Temperature Industrial Boiler Primary Air Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
소결기를 위한 뒤처지는 구부러진 배가스 흡입 팬 과중한 업무 인더스트리얼
Heavy Duty Industrial Backward Curved Sintering Machine Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
산업적 에너지 효율 라임 로터리 킬른 배가스 흡입 팬 방폭
Industrial Energy Efficiency Anti-Explosion Lime Rotary Kiln Flue Gas Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media
장수 에너지 효율 흡진장치 송풍기 단일의 유입구
Long Life Energy Efficiency Single Inlet Dust Collector Fan Detail introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Customized design according to
AC 모터 Antifraying 배기 시멘트 팬 송풍기 4486 ~ 8971m3/h
AC Motor AC Motor Antifraying Exhaust Cement Blower Fan Introduction The 7-08. series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Technical data series
Q235 단일 입구 긴 수명 건조물 취급 송풍기
Q235 Single Inlet Long Lifetime Drying Material Handling Blower Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty
10635~12427Pa 고압 원심 송풍기 앞으로 재료 건조
High Pressure Forward Materials Drying Stainless Steel Blower Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the medium
