우리 의 제품
쓰레기 소각로 높은 볼륨 공기 송풍기 유도 통풍 팬
Garbage Incinerator High Volume Induced Draft Air Blower Fan Introduction The 6-06 series dust exhaust centrifugal fan has the characteristics of low dust accumulation and wear resistant. Garbage Incinerator High Volume Induced Draft Air Blower Fan is suitable for discharging gas containing dust, wood chips and finely divided fibers (If it contains hard particles, a dust removal device must be installed in front of the fan.), it can also be used as a general ventilator for
발전소 열 분산에 있는 유도 통풍 ID 팬을 발송하십시오
Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan Introduction Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan is also suitable for conveying air and non-corrosive, non-self-igniting, non
자유롭게 서 있는 Stokerfeed 보일러 ID 팬에 의하여 유도되는 뒤 원심 팬
Stokerfeed Boiler Forced Draft Antifraying Backward Induced Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal fan is an
유도 통풍 팬 보일러 ID에 의하여 강제되는 송풍 탄소 강철
Industrial Boiler ID Forced Ventilating Carbon Steel Heavy Duty Blower Fan Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission. This
연기 배출 뒤에 구부려진 원심 팬 유도 통풍 송풍기
Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan Introduction The Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Long Lifetime Smoke Exhaust Backward Curved
마포 저항하는 유도 통풍 팬 V 벨트에 의하여 모는 원심 팬
Forced Draft Of Industrial Kilns Abrasion Resistant V-Belt Driven Induced Fan Introduction The 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Forced Draft Of Industrial Kilns Abrasion Resistant V-Belt Driven Induced Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow
보일러 유해한 공기 배출 송풍기에 있는 산업 유도 통풍 팬
Harmful Air Emissions Industrial Boiler Exhaust Induced Draft Centrifugal Fan Introduction Harmful Air Emissions Industrial Boiler Exhaust Induced Draft Centrifugal Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The fan can also be used in cement kiln decomposition process, steel smelting
배출 송풍기 유도 통풍 팬 강제된 송풍 공기 여과 체계
Forced Ventilating Air Filtration System Induced Draught Exhaust Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800 tons/hour can be configured.
능률 에너지 절약 원심 분리기 유도 통풍 송풍기 열 분산
Heat Dissipation Efficient Energy-Saving Induced Draft Centrifugal Blower Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Centrifugal fan is applied in
중간 압력 유도 통풍 팬 보일러 ID 팬 단 하나 폭 단 하나 인레트
Industrial Boiler Forced Induced Draft Building Ventilation Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low
에너지 효율 유도 통풍 팬 단 하나 인레트 킬른 냉각
Energy Efficiency Single Inlet Kilns Cooling Induced Draft Fan Introduction The 7-07 series high-pressure centrifugal fan has a high output pressure, can transport normal temperature or high temperature various gases and various forms of materials, and also can be used in harsh working environments. Such as conveying high temperature/harmful/dangerous gas, hard particles, powder, debris, fiber, forced ventilation, industrial dust collectors, air filtration systems, flue gas
산업 보일러 유도 통풍 팬 고압 SIMO 송풍기 장수
Industrial Boiler Induced Draft Antiwear Long Life Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.
SWSI 원심 팬 유도 통풍 팬 고열 냉각
Coupling Driving High Temperature Cooling Induced Draft Blower Fan Introduction The Coupling Driving High Temperature Cooling Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Coupling Driving High Temperature Cooling Induced
반대로 착용 단 하나 흡입 유도 통풍 송풍기 높은 볼륨 팬 송풍기
High Volume Antiwear Single Suction Induced Draft Blower Fan Introduction The High Volume Antiwear Single Suction Induced Draft Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more
삼상 스테인리스 유도 통풍 팬 뒤 원심 팬
Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan Introduction The Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than
반대로 거친 높은 기류 발전소 팬 산업 원심 송풍기
Anti Abrasive High Air Flow V-Belt Driving Power Plant Industrial Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal fan
화력 발전소에 있는 큰 SIMO 송풍기 석탄 보일러 팬
Large Capacity Coal-Fired Boiler Thermal Power Plant Air Blower Fan Introduction Large Capacity Coal-Fired Boiler Thermal Power Plant Air Blower Fan is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind
산업 킬른 발전소 팬 강압통풍 원심 분리기 송풍기
Forced Draught Of Industrial Kilns Power Plant Centrifugal Blower Fan Introduction The Forced Draught Of Industrial Kilns Power Plant Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel
