우리 의 제품
야금술 산업 보일러를 위한 폐기 가스 먼지 수집가 팬 & 송풍기
Metallurgy Industrial Boiler Waste Gas Dust Collecting Blower Fan Introduction The 7-09 series medium pressure centrifugal fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. It’s suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. It’s a widely used medium-pressure heavy-duty
유도 통풍 보일러 팬 상업적인 원심 팬 매체 압력
Industrial Boiler Induced Draught Medium Pressure Centrifugal Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low noise. It
보일러 동적인 공정한에 있는 뒤에 구부려진 원심 팬 PA 팬
Efficient Energy-Saving Backward Curved Industrial Boiler PA Boiler Fan Introduction The Efficient Energy-Saving Backward Curved Industrial Boiler PA Boiler Fan centrifugal Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials. It
석탄 보일러 팬 단 하나 흡입 원심 배기 엔진 송풍기
Antifraying Energy Saving Coal-Fired Boiler Single Suction Air Fan Introduction 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas,
강압통풍 보일러 Fd 팬 가득 차있는 모양 Q235는 인레트 산업 원심 송풍기를 골라냅니다
Q235 Single Inlet Forced Draft Of Industrial Kilns Centrifugal Boiler Blower Fan Introduction The Q235 Single Inlet Forced Draft Of Industrial Kilns Centrifugal Boiler Blower Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials.
뒤 구부려진 잎 보일러 팬 SWSI 송풍기 높은 착용 저항
Backward Curved High Wear Resistance Centrifugal Boiler Blower Fan Introduction The bearing housing is reserved for the installation position of temperature and vibration sensors, which can facilitate the installation of fan operation monitoring device. Use liquid lubricating oil. It is not necessary to open the bearing housing to replace and fill the lubricating oil. The bearing housing is provided with an observation window for easy observation of the quality and stock of
굴뚝 가스 탈질 작용 보일러 팬 원심 SIMO 송풍기 반대로 연마재
Anti Abrasive Industrial Boiler Flue Gas Denitrification Centrifugal Boiler Fan Introduction The Anti Abrasive Industrial Boiler Flue Gas Denitrification Centrifugal Boiler Fan a special dust-discharging fan designed jointly by the fan industry. It has the characteristics of not easy dust accumulation and wear resistant, high efficiency and low noise. This series is a range of centrifugal fans with a wide range of performance. It is suitable for discharging gas containing
단 하나 흡입 보일러 팬 높은 볼륨 저압 공기 송풍기
Single Suction High Volume Industrial Forced Draught Boiler Fan Introduction The Single Suction High Volume Industrial Boiler Forced Draught Boiler Fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area.The fan system running at normal
산업 배출 보일러 팬 SIMO 송풍기 폭발 보호
Q345 Industrial Explosion Protection Industrial Boiler Exhaust Boiler Fan Introduction The Q345 Industrial Explosion Protection Industrial Boiler Exhaust Boiler Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard
높은 기류 ID 보일러 팬 부식 - 저항하는 배기 엔진
High Air Flow Corrosion Resistant Industrial Boiler ID Boiler Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above
SIMO 큰 원심 송풍기 보일러 폐기 가스 먼지 수집가 팬
Stainless Steel Large Capacity Industrial Boiler Waste Gas Dust Collecting Boiler Fan Introduction The Stainless Steel Large Capacity Industrial Boiler Waste Gas Dust Collecting Boiler Fan have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous
석탄 보일러 팬 환기 높이 능률적인 에너지 절약
Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler Blower Fan Introduction The Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving
실내 저잡음 원심 팬 산업 화학 배출 송풍기
Coupling Driving Heat Dissipation Antiwear Chemical Industry Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings.It can be used to input gas as well as to output gas.The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in
3상 전기 모터 kw 시멘트 팬 75명
75kw Three Phase Electrical Motor Cement Kilns Cooling Duct Fan Detail introduction : 75kw Three Phase Electrical Motor Cement Kilns Cooling Duct Fan is a fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are
야금학 칼코이닝은 달팽이 흡입 통풍 팬 송풍기를 킬스
Metallurgy Induced Draught Calcining Kilns Snail Fan Blower Introduction: The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Metallurgy Induced
SWSI 산업적 폭발 CFB 보일러 원심형 송풍기
Industrial Explosion Protection CFB Boiler Centrifugal Blower Introduction 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the
Q345 Ｖ 벨트 구동 스팀 밀리미터 보일러 팬 660V 1400명
Q345 V-Belt Driving Long Lifetime Steam Boiler Blower Fan Introduction 1. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional bearing cooling devices, reducing users’ investment and maintenance. 2. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. 3. The weld of the impeller and the main shaft are ultrasonic flaw detection to ensure
편흡입 포워드 Sa 원심력 킬로볼트 보일러 팬 670t/H명 6명
Single Suction Forward Industrial Boiler SA Centrifugal Fan Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas,
