"high pressure centrifugal fan"

Biomass Fuel Power Plant Smoke Exhaust Anti-Explosion Air Blower Fan Introduction The 9-08 series has the characteristics of high efficiency, low noise, flat performance curve and wide efficient area. Industrial boilers of 5 ~ 35 tons/hour can be used, those with similar intake conditions and suitable performance can be used, but the maximum temperature shall not more than250°C. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than

Aluminium Alloyed Double Inlet Gas Delivery Industrial Centrifugal Fans Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data series model Rotation

Explosion Proof Gas Burner For Furnace 3 Phase Motor Radial Blower Fan Introduction The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous

Medium Pressure Coupling Driven 16Mn Material Handling Blower Fan Introduction The 7-10 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 87%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Technical data

Q235 Energy Efficiency Backward Flue Gas Fan Radial Fan Blower Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. They can transport clean gas, dusty gas, flammable gas, corrosive gas, powder or granular materials at normal temperature or high temperature. The weld of the impeller and the main shaft are ultrasonic flaw

HG785 Alloyed Steel V-Belt Driven Explosionproof Dust Collector Fan Introduction G4-10 and series dust suction fan are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The fan blade placement angle is optimized, more wear-resistant and longer service life. Motor sliding guides are provided for easy tensioning of the belt to reduce energy loss due to belt slack. Technical data series model Rotation Speed (r/min)

Heavy Duty Wear Resistant Industrial Nickel Iron Kiln Power Plant Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The impeller is calibrated by high standards for dynamic balance to ensure stable operation of the fan. There are a variety of part options to choose from. Product Advantages 1. It is made of high quality carbon steel,

Q235 Single Inlet Cement Fan High Volume Backward Energy Saving Introduction The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. Detail introduction It can also be made into explosion-proof and flame

High Air Flow Forward Boiler Fan Industrial Dust Collector Antiwear Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The fan housing shall be made in steel and its thickness and strength should be able to withstand the maximum running weight of the fan. The volute shall be continuously welded and equipped with access door for removing